Nikon 1546 User Manual (en)

Download
101
t
D
Measuring Preset White Balance
If no operations are performed while the displays are flashing, direct measurement mode 
will end when the exposure meters turn off. The auto meter-off delay can be changed using 
Custom Setting c2 (Auto off timers; 0 157). The default setting is eight seconds.
D
Preset White Balance
The camera can store only one value for preset white balance at a time; the existing value will 
be replaced when a new value is measured. When shooting in mode M, check the exposure 
indicator to ensure that the subject is neither under- nor over-exposed (0 85).
A
Other Methods for Measuring Preset White Balance
To enter preset measurement mode (see above) after selecting preset white balance in the 
information display (0 96), press 
J for a few seconds. If white balance has been assigned to 
the Fn (
E) button (0 163) and preset white balance selected by pressing the Fn (E) button 
and rotating the command dial, the camera will also enter preset measurement mode if the 
Fn
 (
E) button is pressed for a few seconds.
A
Studio Settings
In studio settings, a standard gray panel can be used as a reference object when measuring 
preset white balance.