Nikon 1546 User Manual (en)

Download
28
s
“Point-and-Shoot” Photography 
(
and j Modes)
This section describes how to take photographs in 
i (auto) mode, an 
automatic “point-and-shoot” mode in which the majority of settings 
are controlled by the camera in response to shooting conditions, and 
in which the flash will fire automatically if the subject is poorly lit. To 
take photographs with the flash off while leaving the camera in 
control of other settings, rotate the mode dial to 
j to select auto (flash off ) mode.
Step 1: Turn the Camera On 
1
Turn the camera on.
Remove the lens cap and turn the camera on. 
After a brief pause while the camera cleans the 
image sensor, the information display will 
appear in the monitor.
2
Check the battery level.
Check the battery level in the information 
display or the viewfinder (if the monitor is off, 
press the 
R button to view the information 
display; if the monitor does not turn on, the 
battery is exhausted and must be recharged).
Information display
Viewfinder
Description 
L
Battery fully charged. 
K
Battery partially discharged. 
H
d
Low battery. Ready fully-charged spare battery or 
prepare to charge battery. 
H
(blinks)
d
(blinks)
Battery exhausted; shutter release disabled. Charge or 
exchange battery. 
Power switch