Canon SD100 User Manual (en)

Download
21
Pr
epar
ing t
h
e
 Cam
e
ra
Preparing the Camera
Use the following procedures to charge the battery pack the first time you 
use the camera or when the “Change the battery pack” message displays. 
To protect the battery pack and prolong its life, do not charge it for 
longer than 24 hours continuously.
• Since this is a lithium ion battery pack, you need not completely 
discharge it before recharging. It can be recharged at any point.
• It takes approximately 95 minutes to fully charge the battery pack from a 
fully discharged state (based on Canon’s testing standard). Charging it 
within a temperature range of 5° to 40 °C (41° to 104 °F) is recommended.
• Charge times may vary according to the ambient temperature and 
the battery pack’s charge state.
• See Battery Capacity (p. 175).
• You may hear a noise during charging. This is not a malfunction.
Charging the Battery Pack
1
Insert the battery pack into the 
battery charger.
Align the battery pack according to the 
arrows on the battery and the charger. 
Insert the battery securely.
2
Battery charger model names and types 
vary by region 
(For CB-2LU)
Plug the battery charger into a 
power outlet.
(For CB-2LUE)
Attach the power cord to the battery 
charger and plug it into a power outlet.
• The charge indicator will light orange 
while the battery pack is charging. It will 
change to green when the charge is 
complete.
• After charging, unplug the battery charger 
and remove the battery pack.
Charge Indicator