Canon 0140C001 User Manual (en)

Download
95
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
Still Images
Movies
Using an Eye-Fi Card
Before using an Eye-Fi card, always confirm that local use is permitted.
Inserting a prepared Eye-Fi card enables automatic wireless transfer of 
images to a computer or uploading to a photo-sharing website.
Images are transferred by the Eye-Fi card. Refer to the card’s user manual 
or contact the manufacturer for instructions on preparing and using cards or 
resolving transfer problems.
• 
When using an Eye-Fi card, keep the following points in mind.
Cards may continue to transmit radio waves even when [Eye-Fi 
trans.] is set to [Disable] (
). Remove the Eye-Fi card before 
entering hospitals, aircraft, or other areas where transmission is 
prohibited.
When troubleshooting image transfer issues, check the card and 
computer settings. For details, refer to the card’s user manual.
Poor Eye-Fi connections may cause image transfer to take a long 
time, and transfer may be interrupted in some cases.
Eye-Fi cards may become hot, due to their transfer functions.
Battery power will be consumed faster than in normal use.
Camera operation may become sluggish. To resolve this, try 
setting [Eye-Fi trans.] to [Disable].
Connection status of Eye-Fi cards in the camera can be checked on the 
shooting screen (in regular information display mode) or playback screen (in 
simple information display mode).
(Gray)
Not connected
Interrupted
(Blinking white) Connecting
Not communicating
(White)
Connected
Error acquiring Eye-Fi card information*
2
(Animated)
Transfer in progress*
1
*1 Power saving (
) on the camera is temporarily disabled during image transfer.
*2 Restart the camera. Repeated display of this icon may indicate a problem with the 
card.
Images labeled with a [ ] icon have been transferred.
Checking Connection Information
Check the access point SSID used by the Eye-Fi card or the connection 
status, as needed.
z
z
Press the <
n> button, choose 
[Eye-Fi Settings] on the [
3] tab, and then 
press the <
m> button.
z
z
Choose [Connection info], and then press 
the <
m> button.
z
z
The connection information screen is 
displayed.