Casio EX-FH25 User Manual (en)

111

Viewing Snapshots and Movies

• Output to a TV is not supported while the camera is in the REC mode.
• When the camera is connected to a TV for movie playback, only movie images are 

displayed on the TV screen. The camera’s monitor screen will show on-screen 
information only (without any movie image).

• Before connecting to a TV to display images, be sure to configure the camera’s 

[r] (REC) and [p] (PLAY) buttons for “Power On” or “Power On/Off” (page 154).

• Audio is initially output by the camera at maximum volume. When you first start 

displaying images, set the TV volume control at a relatively low level and then 
adjust it as required.

• Audio is monaural.
• Some TVs may not be able to output images and/or audio correctly.
• All icons and indicators that appear on the monitor screen also appear on the TV 

screen. You can use [DISP] to change the display contents.

Use the following method to connect the camera to the recording device using the 
camera’s bundled AV cable.

– DVD recorder or video deck: Connect the AV cable to the VIDEO IN and AUDIO IN 

terminals.

– Camera: Connect the AV cable to the USB/AV port

You can play a slideshow of snapshots and movies on the camera and record it on a 
DVD or video tape. You can record movies by selecting “» Only” for the slideshow 
“Images” setting (page 112).
For information about connecting a monitor to the recording device and about how to 
record, see the user documentation that comes with the recording device you are 
using.