Casio EX-FH25 User Manual (en)

Using the Camera with a Computer
Turn off the camera and then use the USB cable that comes with the 
camera to connect it to your Macintosh.
• The camera does not draw power over the USB cable. Check the battery level 
before connecting and make sure it is not too low.
• Make sure that you insert the cable connector into the USB/AV port until you 
feel it click securely into place. Failure to insert the connector fully can result in 
poor communication or malfunction.
• Note that even while the connector is fully inserted, you still will 
be able to see the metal part of the connector as shown in the 
• When connecting the USB cable to a USB port, make sure you 
align the connector correctly with the port.
• Your computer may not be able to recognize the camera if you connect via a 
USB hub. Always connect directly to the computer’s USB port.
Turn on the camera.
The camera’s back lamp will light green at this time. In this mode, your Macintosh 
recognizes the memory card loaded in the camera (or the camera’s built-in 
memory if it does not have a memory card loaded) as a drive. The appearance of 
the drive icon depends on the Mac OS version you are using.
Double-click the camera’s drive icon.
USB port
USB cable
Making sure that the 6 mark on the camera is 
aligned with the 4 mark of the USB cable 
connector, connect the cable to the camera.
USB/AV port
Large connector
Small connector
Terminal cover