Canon MARK IV User Manual (en)
106
The camera automatically sets the shutter speed and aperture to suit
the subject’s brightness. This is called Program AE.
the subject’s brightness. This is called Program AE.
* <d> stands for Program.
* AE stands for Auto Exposure.
* AE stands for Auto Exposure.
1
Set the shooting mode to <d>.
Press the <W> button and turn
the <6/5> dial to select <d>.
the <6/5> dial to select <d>.
2
Focus the subject.
Look through the viewfinder and aim
the selected AF point over the subject.
Then press the shutter button halfway.
the selected AF point over the subject.
Then press the shutter button halfway.
X
The AF point which achieves focus
flashes in red, and the focus
confirmation light <o> in the
viewfinder’s bottom right lights. (in
One-Shot AF mode)
flashes in red, and the focus
confirmation light <o> in the
viewfinder’s bottom right lights. (in
One-Shot AF mode)
X
The shutter speed and aperture will
be set automatically and displayed in
the viewfinder and on the top LCD
panel.
be set automatically and displayed in
the viewfinder and on the top LCD
panel.
3
Check the shutter speed and
aperture display.
aperture display.
A correct exposure will be obtained
as long as the shutter speed and
aperture display do not blink.
as long as the shutter speed and
aperture display do not blink.
d
: Program AE
COP
Y