Canon MARK IV User Manual (en)
112
In this mode, you set both the shutter speed and aperture as desired. To
determine the exposure, refer to the exposure level indicator in the
viewfinder or use a commercially-available exposure meter. This
method is called manual exposure.
determine the exposure, refer to the exposure level indicator in the
viewfinder or use a commercially-available exposure meter. This
method is called manual exposure.
* <a> stands for Manual.
1
Set the shooting mode to <a>.
Press the <W> button and turn
the <6/5> dial to select <a>.
the <6/5> dial to select <a>.
2
Set the shutter speed and
aperture.
aperture.
To set the shutter speed, turn the <6>
dial while looking at the top LCD panel.
dial while looking at the top LCD panel.
To set the aperture, set the power
switch to <J> and turn the <5> dial
while looking at the top LCD panel.
switch to <J> and turn the <5> dial
while looking at the top LCD panel.
You can also set it by pressing the <O>
button, then turning the <6/5> dial.
button, then turning the <6/5> dial.
3
Focus the subject.
Press the shutter button halfway.
X
The exposure setting will be displayed.
On the right of the viewfinder, the
exposure level indicator <s> indicates
the current exposure level relative to
the standard exposure index <a>.
exposure level indicator <s> indicates
the current exposure level relative to
the standard exposure index <a>.
4
Set the exposure.
Check the exposure level and set the
desired shutter speed and aperture.
desired shutter speed and aperture.
5
Take the picture.
a
: Manual Exposure
Shutter speed
Aperture
If [8C.Fn II -4: Auto Lighting Optimizer] (p.81) is set to a setting other
than [3: Disable], the image may still look bright even if a darker exposure
has been set.
than [3: Disable], the image may still look bright even if a darker exposure
has been set.
COP
Y