Canon MARK IV User Manual (en)
28
1
Connect the charger to a power
outlet.
outlet.
Connect the power plug to a power
outlet, and connect the power cord to
the charger.
outlet, and connect the power cord to
the charger.
When no battery is attached, all the
indicator lamps will be off.
indicator lamps will be off.
2
Remove the protective covers
from the charger and battery.
from the charger and battery.
Remove the protective cover on the
charger by sliding it out.
charger by sliding it out.
3
Recharge the battery.
Slide the battery into the charger’s
slot as shown by the arrow, and make
sure it is securely attached.
slot as shown by the arrow, and make
sure it is securely attached.
You can attach the battery to slot A or B.
X
The battery will start recharging and
the green status lamp will blink.
the green status lamp will blink.
X
When the battery is fully charged, all
three Charge level indicators will light
(50%/80%/100%).
three Charge level indicators will light
(50%/80%/100%).
It takes approx. 2 hours to fully recharge
a completely exhausted battery.
a completely exhausted battery.
The time required to recharge the battery
depends on the ambient temperature
and battery’s charge level.
depends on the ambient temperature
and battery’s charge level.
Charging the Battery
COP
Y