Canon MARK IV User Manual (en)
37
Installing and Removing the Card
4
Set the power switch to <1>.
X
The number of remaining shots will
be displayed on the top LCD panel
and in the viewfinder.
be displayed on the top LCD panel
and in the viewfinder.
X
The rear LCD panel will indicate
which card(s) has been installed. The
images will be recorded to the card
with the < > arrow next to the
respective card’s indicator.
which card(s) has been installed. The
images will be recorded to the card
with the < > arrow next to the
respective card’s indicator.
CF card indicator
SD card indicator
Card selection icon
Card selection icon
Shots remaining
SDHC memory cards can be used with the camera.
Although the thickness is different between the two types of
CF (CompactFlash) cards, either one can be inserted into the
camera.
CF (CompactFlash) cards, either one can be inserted into the
camera.
Ultra DMA (UDMA) CF cards and hard disk-type cards can also be used
with the camera. UDMA CF cards enable faster data writing.
with the camera. UDMA CF cards enable faster data writing.
The number of possible shots varies depending on the card’s capacity,
image-recording quality, ISO speed, etc.
image-recording quality, ISO speed, etc.
Setting the [2 Release shutter without card] menu option to [Disable]
will prevent you from forgetting to install a card (p.52).
will prevent you from forgetting to install a card (p.52).
COP
Y