Canon MARK IV User Manual (en)
52
Before You Start
To save battery power, the camera turns off automatically after a certain
time of non-operation. You can change this auto power-off time. If you
do not want the camera to turn off automatically, set this to [Off]. After
the power turns off, you can turn on the camera again by pressing the
shutter button or other button.
time of non-operation. You can change this auto power-off time. If you
do not want the camera to turn off automatically, set this to [Off]. After
the power turns off, you can turn on the camera again by pressing the
shutter button or other button.
1
Select [Auto power off].
Under the [5] tab, select [Auto
power off], then press <0>.
power off], then press <0>.
2
Set the desired time.
Turn the <5> dial to select the
setting, then press <0>.
setting, then press <0>.
Prevents the beeper from sounding when focus is achieved.
1
Select [Beep].
Under the [2] tab, select [Beep], then press <0>.
2
Select [Off].
Turn the <5> dial to select [Off], then press <0>.
This prevents shooting if there is no card in the camera.
1
Select [Release shutter without card].
Under the [2] tab, select [Release shutter without card], then
press <0>.
press <0>.
2
Select [Disable].
Turn the <5> dial to select [Disable], then press <0>.
3
Set the Power-off Time/Auto Power Off
3
Silencing the Beeper
3
Card Reminder
Even if [Off] has been set, the LCD monitor will turn off automatically after
30 min. to save power. (The camera’s power does not turn off.)
30 min. to save power. (The camera’s power does not turn off.)
COP
Y