Canon EOS60D18135ISKIT User Manual (en)

Download
101
If the image comes out dark or the contrast is low, the brightness and 
contrast can be corrected automatically. The default setting is [Standard]. 
With JPEG images, the correction is done when the image is captured.
1
Select [Auto Lighting Optimizer].
 
Under the [2] tab, select [Auto 
Lighting Optimizer
], then press 
<0>.
2
Set the correction setting.
 
Select the desired setting, then press 
<0>.
3
Take the picture.
 
The image will be recorded with the 
brightness and contrast corrected if 
necessary.
3
 Auto Lighting OptimizerN
With correction
Without correction
 
If [8C.Fn II -3: Highlight tone priority] is set to [1: Enable], the Auto 
Lighting Optimizer will be set automatically to [Disable] and you cannot 
change this setting.
 
Depending on the shooting conditions, noise might increase.
 
If a setting other than [Disable] is set and you use exposure 
compensation, flash exposure compensation, or manual exposure to 
darken the exposure, the image might still come out bright. If you want a 
darker exposure, set this to [Disable] first.
In Basic Zone modes, [Standard] is set automatically.
COP
Y