Canon EOS60D18135ISKIT User Manual (en)

Download
121
By changing the shutter speed or aperture automatically, the camera 
brackets the exposure up to ±3 stops in 1/3-stop increments for three 
successive shots. This is called AEB.
* AEB stands for Auto Exposure Bracketing.
1
Select [Expo. comp./AEB].
 
Under the [2] tab, select [Expo. 
comp./AEB
], then press <0>.
2
Set the AEB amount.
 
Turn the <6> dial to set the AEB amount.
 
Press the <U> key to set the exposure 
compensation amount. If AEB is 
combined with exposure compensation, 
AEB will be applied centering on the 
exposure compensation amount.
 
Press <0> to set it.
X
When you exit the menu, <h> and the AEB 
level will be displayed on the LCD panel.
3
Take the picture.
 
Focus and press the shutter button completely. 
The three bracketed shots will be taken in this 
sequence: Standard exposure, decreased 
exposure, and increased exposure.
 
Follow steps 1 and 2 to turn off the AEB amount display.
 
AEB will be canceled automatically when you set the power switch 
to <2> or when the flash is ready to fire.
h
 Auto Exposure Bracketing (AEB)N
AEB amount
Canceling AEB
 
If the drive mode is set to <u>, you must press the shutter button three 
times. When <o> or <i> is set and you hold down the shutter button 
completely, the three bracketed shots will be taken continuously. Then 
the camera will stop shooting. When <Q> or <k> is set, the three 
bracketed shots will be taken continuously after a 10-sec. or 2-sec. delay.
 
Neither flash nor bulb exposures can be used with AEB.
COP
Y