Canon EOS60D18135ISKIT User Manual (en)

Download
139
The camera’s built-in flash can work as a master unit with Canon 
Speedlites having a wireless slave feature and wirelessly trigger the 
Speedlite to fire. Be sure to read about wireless flash photography in 
the Speedlite’s instruction manual.
Regarding your Speedlite (slave unit), refer to its instruction manual and 
set it as follows. Slave unit control settings other than the below are all 
set with the camera. Different types of slave units can be used and 
controlled together.
(1) Set the Speedlite as a slave unit.
(2) Set the Speedlite’s transmission channel to the same one as 
the camera’s.
(3 If you want to set the flash ratio (p.144), set the slave unit ID.
(4) Position the camera and slave unit(s) within the range shown 
below.
(5) Face the slave unit’s wireless sensor toward the camera.
Canceling the slave unit’s auto power off
To cancel the slave unit’s auto power off, press the camera’s <A> 
button. If you are using manual flash firing, press the slave unit’s test 
firing (PILOT) button to cancel the auto power off.
Using Wireless FlashN
Slave Unit Settings and Position
Approx.
10m
(32.8ft.)
Approx.
7m
(23.0ft.)
o
Approx.
80 
Approx. 5m
(16.4ft.)
Approx. 7m
(23.0ft.)
Wireless flash set-up example
Indoors
Outdoors
COP
Y