Canon EOS60D18135ISKIT User Manual (en)

 Checking the Battery Information
Affixing a serial No. label onto all the registered Battery Pack LP-E6’s 
makes it convenient.
Write the serial No. on a label.
Write the serial No. displayed on the 
battery history screen on a label 
approx. 25 mm x 15 mm / 1.0 in. x 0.6 
in. in size.
Take out the battery and affix the 
Set the power switch to <2>.
Open the battery compartment cover 
and remove the battery.
Affix the label as shown (side with no 
electrical contacts) in the illustration.
Repeat this procedure for all of your 
battery packs so you can easily see 
the serial No.
Labeling the Serial No. on the Battery
Serial No.
Do not affix the label on any part other than as shown in the illustration in 
step 2. Otherwise, the misplaced label might make it difficult to insert the 
battery or impossible to turn on the camera.
If you use Battery Grip BG-E9, the label might peel off as you repeatedly 
load and remove the battery pack. If it peels off, affix a new label.