Canon EOS60D18135ISKIT User Manual (en)

Installing and Removing the SD Card
Open the cover.
Set the power switch to <2>.
Check that “Recording...” is not 
displayed on the LCD monitor.
Make sure the access lamp is off, 
then open the cover.
Remove the card.
Gently push in the card, then let go. 
The card will stick out.
Pull the card straight out, then close 
the cover.
Removing the Card
Access lamp
When the access lamp is lit or blinking, it indicates that the images 
are being written to or read by the card, being erased, or data is 
being transferred. While the access lamp is lit or blinking, never do 
any of the following. Doing so may damage the image data. It may 
also damage the card or camera.
• Opening the card slot cover.
• Removing the battery.
• Shaking or banging the camera around.
If the card already contains recorded images, the image number might 
not start from 0001 (p.106).
Do not touch the card’s contacts with your fingers or metal objects.
If a card-related error message is displayed on the LCD monitor, remove 
and reinstall the card. If the error persists, use a different card.
If you can transfer all the images on the card to a computer, transfer all 
the images and then format the card with the camera (p.48). The card 
may then return to normal.
SDHC and SDXC cards featuring UHS (Ultra High Speed) enable a 
maximum writing speed of SD Speed Class 10.