Canon EOS7DBODY User Manual (en)

Download
121
Using Wireless FlashN
5
Select [Wireless func.].
 
For [Wireless func.], select [0], 
then press <0>.
X
Under [Wireless func.], [Channel], 
etc., will be displayed.
6
Set [Channel].
 
Set the channel (1-4) to the same one 
as the slave unit.
7
Fire a test flash.
 
After checking that the slave unit is 
ready to fire, go to the screen in step 
5 and press the <A> button.
X
The slave unit will fire. If it does not 
fire, check your settings again 
(p.119).
8
Take the picture.
 
Set the camera and take the picture 
as you would with normal flash 
shooting.
 
To terminate wireless flash shooting, 
set [Wireless func.] to [Disable].
 
Test flash can also be used to wake up slave units from auto power off.
 
Setting [E-TTL II] to [Evaluative] is recommended.
 
If you use only one external Speedlite, the [Firing group] setting does 
not have any effect.
 
The slave unit is controlled by the built-in flash’s light pulse signal.
 
Wireless flash will not work if the [Flash mode] is set to [MULTI flash].
COP
Y