Canon EOS7DBODY User Manual (en)

Download
153
k Shooting Movies
When the shooting mode is <a> (p.102), you can 
manually set the shutter speeds, aperture, and ISO 
speeds shown below and shoot a movie. Using manual 
exposure to shoot movies is for advanced users.
Shutter speed : Turn the <6> dial. The settable shutter speeds 
depend on the frame rate <9>.
• 7 / 8
: 1/4000 sec. - 1/60 sec.
• 4 / 5 / 6 : 1/4000 sec. - 1/30 sec.
Aperture
Set the Quick Control Dial switch to <J>, and turn the 
<5> dial.
ISO speed
Press the <m> button, then turn the <6> dial.
• Manual setting range : 100 - 6400
• Auto ISO range
: 100 - 6400
Using Manual Exposure
 
AE lock and exposure compensation cannot be set.
 
If <Q> is set and the ISO speed or aperture changes during movie 
shooting, the white balance may also change.
 
If you shoot a movie under fluorescent lighting, the movie image might 
flicker.
 
With the ISO speed set to Auto, you can shoot a movie as if it were in 
aperture-priority AE mode (fixed aperture, standard exposure).
 
If [8C.Fn II -3: Highlight tone priority] is set to [1: Enable], the 
settable ISO speed range will be ISO 200 - 6400.
 
When shooting a movie of a moving subject, a shutter speed of 1/30 sec. 
to 1/125 sec. is recommended. The faster the shutter speed, the less 
smooth the subject’s movement will look.
 
Changing the aperture during movie shooting is not recommended since 
variations in the exposure, due to the drive of the lens aperture, will be 
recorded.
 
If you playback the movie with “Shooting information display” (p.163), the 
shooting mode, shutter speed, and aperture will not be displayed. The 
image information (Exif) will record the settings used at the start of the 
movie.
COP
Y