Canon 40D User Manual (en)

Download
138
wPrinting
4
Set the printing effects.
 
Set as necessary.
 
Turn the <5> dial to select the item 
on the upper right, then press <0>.
 
If the <e> icon is displayed next to 
<z>, the printing effects can also 
be adjusted. (p.140)
 
Next, turn the <5> dial to select the 
desired printing effect, then press 
<0>.
The screen display may differ depending on the printer.
When the printing effects are changed, the changes will be reflected on the 
screen. However, the actual result of the printing effects might look different 
from what you see on screen. The screen only shows an approximate rendition. 
This also applies to [Brightness] and [Adjust levels] on page 140.
Item
Description
EOff
Same as the printing characteristics turned “On”. No automatic 
correction will be performed.
EOn
The image will be printed according to the printer’s standard 
colors. The image’s Exif data is used to make automatic 
corrections.
EVivid
The image will be printed with higher saturation to produce 
more vivid blues and greens.
ENR
The image noise is reduced before printing.
0
 B/W
Prints in black-and-white with true blacks.
0
 Cool tone Prints in black-and-white with cool, bluish blacks.
0
 Warm tone Prints in black-and-white with warm, yellowish blacks.
z
Natural
Prints the image in the actual colors and contrast. No automatic 
color adjustments will be applied.
z
Natural M
The printing characteristics are the same as the “Natural” 
setting. However, this setting enables finer printing adjustments 
than with “Natural.”
EDefault
The printing will differ depending on the printer. For details, see 
the printer’s instruction manual.