Panasonic DMC-FX12 User Manual (en)

Download
Preparation
15
VQT1C14
Setting Date/Time 
(Clock Set)
∫ Initial setting
The clock is not set so the following screen 
appears when you turn the camera on.
A: [MENU/SET] button
B: Cursor buttons
1 Press [MENU/SET].
2 Press 
3/4/2/1 to select the 
date and time.
A: Time at the home area
B: Time at the travel destination (P56)
2/1: Select the desired item
.
3/4: Set the display order for the date 
and time.
: Cancel without setting the clock.
3 Press [MENU/SET] to set.
• Turn the camera off after setting  the 
clock. Then set the mode dial to a 
recording mode to turn the camera on and 
check whether or not the clock setting is 
correct.
∫ Changing the clock setting
Press [MENU/SET].
Press 
3/4 to select [CLOCK SET]. 
(P64)
Press 
1 and then perform steps 
2
 and 
3
 to set the clock.
Press [MENU/SET] to close the menu.
• You can also set the clock in the 
[SETUP] menu. (P18)
• When a fully charged battery has been 
inserted for more than 24 hours, the clock 
setting is stored (in the camera) for at 
least 3 months even if the battery is 
removed. (If you insert a battery that is not 
sufficiently charged, the length of time that 
the clock setting is stored may become 
less.) However, the clock setting is 
canceled after this length of time. In this 
case, set the clock again.
• You can set the year from 2000 to 2099. 
The 24-hour system is used.
• If the clock is not set, the correct date 
cannot be printed when you stamp the 
date on the pictures with [DATE STAMP] 
(P72) or order a photo studio to print the 
pictures. (P75)
ON
OFF
PLEASE SET THE CLOCK
CLOCK SET
MENU
M/D/Y
JAN
1
1 2007
.
.
0
0 00
:
CLOCK SET
SELECT
SET
EXIT
MENU
:
:
CANCEL
VQT1C14ENG.book  15 ページ  2006年12月4日 月曜日 午後11時0分