Panasonic DMC-FX12 User Manual (en)

Download
Advanced (Recording pictures)
35
VQT1C14
∫ Canceling Power LCD or High angle 
mode
• If you press and hold [LCD MODE] again 
for 1 second the screen shown in step 
2
 
is displayed. Select [OFF] to cancel Power 
LCD mode or High angle mode.
• High angle mode is also canceled if you 
turn the camera off or power save mode is 
activated.
• The brightness of the pictures displayed 
on the LCD monitor is adjusted when 
Power LCD mode or High angle mode is 
activated. Therefore, some subjects may 
look different on the LCD monitor. 
However, this does not affect the recorded 
pictures.
• The LCD monitor automatically returns to 
normal brightness after 30 seconds when 
recording in Power LCD mode. Press any 
button to make the LCD monitor bright 
again.
• If the screen is difficult to see because of 
light from the sun etc. shining on it, use 
your hand or another object to block the 
light.
• High angle mode is not activated in the 
following cases.
– In simple mode [
]
– In playback mode
– In print mode [
]
– While the menu screen is displayed
– While the review screen is displayed
Taking Pictures using 
the Built-in Flash
A: Photo flash
Do not cover it with your fingers or other 
objects.
∫ Switching to the appropriate flash 
setting
Set the flash to match the recording.
1 Press 
1  [ ].
2 Press 
3/4 to select a mode.
• You can also press 
1 [ ] to select.
• For information about flash settings that 
can be selected, refer to “Available flash 
settings by recording mode”. (P36)
3 Press [MENU/SET].
• You can also press the shutter 
button halfway to finish.
• The menu screen disappears after 
about 5 seconds. At this time, the 
selected item is automatically set.
: AUTO
The flash is automatically activated when 
the recording conditions make it necessary.
FLASH
SET
SELECT
MENU
AUTO/RED-EYE
FORCED OFF
FORCED FLASH ON
AUTO
VQT1C14ENG.book  35 ページ  2006年12月4日 月曜日 午後11時0分