Panasonic WV-CW504F User Manual (en)

Download
16
Using a two-gang junction box
 •  When the camera is installed using the two-gang junction box, mount the camera attachment
(accessory) to the embedded box installed on the wall or ceiling as a first step.  
Note:
  •  For wall mounting: 
    Installation shall be performed in such a manner that "MTOP" of the camera attachment faces 
upward. 
  •  For ceiling mounting: 
    The front side (model number indication face) of the camera shall be aligned in the direction of 
the arrow in "<FRONT" on the camera attachment. 
Using the mounting base WV-Q115
 •  When installing the camera with the mounting base WV-Q115, attach the mounting base to the
wall or ceiling in the first place. (+ next page.)
    Mount the camera attachment (accessory) by using the screws supplied with mounting brack-
et. (+ next page.)
    (Recommended tightening torque: 0.78 N·m {0.58 lbf·ft})
Note:
 •  When  installing  the  camera  on  the  wall  or  ceiling  where  cable  holes  are  already  provided,  or
when installing the camera with exposed wiring, the mount bracket shall be used. 
 •  The female screws for piping conform to ANSI NPSM (parallel pipe threads) 3/4".
    The female screws for piping shall be removed with a hexagon wrench. 
 •  To connect conduit from the top, refer to page 29.
     
46 mm {1-13/16"}
83.5 mm {3-9/32"}
[Mounting position on wall or ceiling]
Camera attachment (accessory)
Two-gang junction box
FRON
T
TOP
FRON
T
TOP