Panasonic WV-CW504F User Manual (en)

Download
25
x
  Adjusts the focus.
    Focus adjustment shall be performed when camera 
angle adjustment are performed. 
    Adjust  the  focus  by  following  the  adjusting  proce-
dure of q, w, and e shown below. 
 
q
  Loosen the zoom lock knob and move the knob 
between TELE and WIDE to obtain the appro-
priate angle of view, and then tighten the zoom 
lock knob. 
 
w
  Loosen  the  focus  lock  knob,  make  coarse 
adjustment  of  the  focus,  and  then  tighten  the 
focus lock knob. 
 
e
  Perform  major  adjustment  of  back  focus 
through  the  setup  menu  or  perform  major 
adjustment by following Steps 3 and 4 below (+ Operating Instructions (PDF)). 
Note:
 •  Reset  the  back  focus  position  to  the  CS  mount  default  position  before  the  back  focus  adjust-
ment. (Hold down the right and left buttons simultaneously for 2 seconds or more, or move the 
cursor to "MANUAL-ADJ" of "BACK-FOCUS SETUP" in the setup menu and press the right and 
left buttons simultaneously for 2 seconds or more after pressing the setting button.)
c
   Press the [ABF1] button after adjusting the view angle while viewing the monitor 
for adjustment. 
    The ABF operation indicator (+ page 12) lights, the focus position is displayed in the lower part 
of the screen, and the back focus is automatically adjusted. 
TELE
TELE
WIDE
WIDE
FAR
FAR
NEAR
NEAR
Zoom lock knob
Focus lock knob
 NEAR 
 
   FAR
  .........
|..........
INDICATOR XXXX FOCUSING