Panasonic WV-CW504F User Manual (en)

Download
8
Precautions
The following points as well as the con-
tents of "Warning" and "Caution" shall be 
observed. 
Refer installation work to the dealer. 
Installation work requires technique and experi-
ences.  Otherwise  injury,  or  damage  to  the 
product may result. 
Be sure to consult the dealer. 
Do not insert objects inside the product. 
If  water  or  metallic  items  enter  the  product,  it 
may cause fire or electric shock. 
Turn  the  power  off  immediately  and  contact 
qualified service personnel for service. 
Do not attempt to disassemble or modify 
the product. 
Failure to observe this may cause fire or electric 
shock. 
Consult the dealer for the repair or inspections. 
Stop operation immediately when some-
thing is wrong with the product. 
When smoke goes up from the product or the 
smell of smoke comes from the product, con-
tinued use will result in fire, injury, or damage to 
the product. 
Turn  the  power  off  immediately  and  contact 
qualified service personnel for service. 
Select an installation area that can sup-
port the total weight. 
Selecting  an  inappropriate  installation  surface 
may  cause  the  product  to  fall  down  or  topple 
over, resulting in injury. 
Installation work shall be started after sufficient 
reinforcement. 
Periodic inspections shall be conducted. 
Rust on the metal parts or screws may cause 
the product to fall down resulting in injury. 
Consult the dealer for the inspections. 
This product shall be installed in a vibra-
tion-free place. 
Failure to observe this may cause screws and 
bolts  to  be  loosened  and  consequently  to  fall 
resulting in injury. 
Install this product high enough to ensure 
that people don't hit their heads. 
Failure to observe this may cause a drop result-
ing in injury or accidents. 
Do not strike or give a strong shock to this 
product. 
Failure to observe this may cause injury or fire. 
Be sure to turn off the power before wir-
ing. 
Failure  to  observe  this  may  cause  electric 
shock.  A  short  circuit  or  wrong  wiring  may 
cause fire.
Do not use the product in an atmosphere 
of flammable gases. 
Failure  to  observe  this  may  cause  injury  by 
explosion. 
Avoid installing the product in locations 
where it is subject to damage by salt or 
corrosive gas. 
Otherwise the mounting fixtures will deteriorate, 
causing the product to fall down and leading to 
accidents. 
Use the specified mount bracket. 
Failure to observe this may cause a drop result-
ing in injury or accidents. 
Do not rub the edges of metal parts with 
your hand. 
Failure to observe this may cause injury. 
Tighten screws and mounting fixtures to 
the specified torque. 
Failure to observe this may cause a drop result-
ing in injury or accidents.