Panasonic WV-SW396 User Manual (en)

Download
Connection
Caution:
Before starting connection, make sure that the circuit breaker is switched off. Failure to observe this may cause fire, 
electric shock, injury, or damage to the product. 
    
Coaxial cable
To the monitor used 
for adjustment
8P alarm cable (accessory)
To a sensor
To a plug-in power type microphone
To an external powered speaker
To a PoE+ hub, PC, etc.
Output cable for the 
monitor used for 
adjustment
External I/O cable
Microphone input cable (white)
Audio output cable (black)
LAN cable (category 5e or better, STP*)
* E model only
(BNC)
Network cable
8P alarm cable connector
ALARM IN1/DAY/NIGHT IN (black) (EXT I/O 1)
GND (brown)
ALARM IN2/ALARM OUT (red) (EXT I/O 2)
GND (orange)
ALARM IN3/AUX OUT (yellow) (EXT I/O 3)
GND (light blue or green)
Unused (blue)
Unused (purple)
Power cable
Brown
Blue
Green/Yellow 
 GND
To the power supply (24 V AC, 50 Hz/60 Hz)
• Power cable
Connect the power cable to the 24 V AC power supply using the 24 V AC power supply connector kit (accessory). 
Important:
 •  The power supply of 24 V AC shall be insulated against 120 V AC (for U.S. and Canada) or 220 V - 240 V AC (for
Europe and other countries).
 •  Do not cut or process the network cable since the power is superimposed when using a PoE+ device for power sup-
ply. Besides, do not put an excessive weight on connected sections.
 
    
22