Panasonic WV-SW396 User Manual (en)

Download
Symptom
Cause/solution
Reference 
pages
Live indicator keeps on 
blinking orange approx. in 2 
seconds intervals. 
• UPnP
TM
 error has occurred since the power is not supplied to the 
router. 
  Turn on the power of the router. Wait until the connections are 
established. 
• An error has occurred during the port update by the UPnP func-
tion. 
  If the router in use does not support the UPnP function, perform 
the port forwarding setting for the router. In addition, deactivate the 
setting of auto port forwarding for the camera. 
Operating 
Instructions 
(included in 
the CD-ROM)
• UPnP function of the router is disabled.
  Refer to the operating instructions of the router to enable the 
UPnP function.
Live indicator never lights up.
• Is "Off" selected for "Link/Access LED" on the "Basic" page?
  Select "On" or "On(Access)" for the indicator setting.
Operating 
Instructions 
(included in 
the CD-ROM)
Live indicator keeps on 
blinking red.
• The camera may be out of order.
  Contact your dealer. 
• Refer to the readme file on the provided CD-ROM for further infor-
mation after checking the displayed contents of the "Maintenance" 
page - the [Status] tab - "Self check" of the setup menu. 
Live indicator lights red.
• Isn’t the write protect switch of the inserted SDHC/SD memory
card set to "LOCK"? 
  Unlock the write protect switch of the SDHC/SD memory card. 
• Hasn't the inserted SDHC/SD memory card been formatted on a
PC? 
  Use an SDHC/SD memory card formatted on the camera. 
  Or install the software to format the SDHC/SD memory card on 
the PC. Refer to our website (http://panasonic.net/pss/security/
support/info.html) for further information about the supported soft-
ware. 
• Isn't the inserted SDHC/SD memory card faulty?
  Replace the card with a normal one. 
Operating 
Instructions 
(included in 
the CD-ROM)
Audio input contains noise.
• Check the following.
 • Grounding of the camera, a switching hub or peripheral devices
are not done. 
 • The camera is used near an electrical power line.
 • The camera is used near a device which produces strong mag-
netic field or radio waves (such as near a TV/radio antenna, a 
motor of an air conditioning system, a transformer, etc.) 
  When audio input still contains noise even after checking the 
above possibilities, use a powered microphone or connect audio 
output with low output impedance.
12
The power cable insulation is 
damaged. 
    The power cable and connectors are worn out. 
  This may result in electric shock or a fire. 
  Unplug the power cable from the AC outlet immediately, and refer 
to qualified service personnel.
The power cable, plug and 
connectors get hot during 
use. 
The power cable gets hot 
when bent or stretched. 
34