Samsung PRO4831 User Manual (en)

Shooting in the dark
Shooting options
Slow Sync:
•  The flash fires and the shutter stays open longer.
•  This option is recommended when you want to capture more 
ambient light to reveal more details in the background.
•  Use a tripod to prevent your photos from blurring.
•  The camera will display the shake warning   when you are 
shooting in low light.
Red-eye Fix:
•  The flash fires twice when the subject or background is dark. The 
camera corrects red-eyes through its advanced software analysis.
•  There is an interval between the 2 bursts of the flash. Do not move 
until the flash fires a second time.
Available options may differ depending on the shooting conditions.
Flash options are not available if you set Burst options or select Blink Detection
Make sure that your subjects are within the recommended distance from the 
flash. (p. 152)
If light from the flash is reflected or there is a substantial amount of dust in the 
air, tiny spots may appear in your photo.
In some modes, you can also set the flash option by pressing [m], and then 
selecting Flash.
Adjusting the flash intensity
Adjust the flash intensity to avoid over-exposed or under-exposed photos.
In Shooting mode, press [F]. 
Scroll to an option. 
Press [D]. 
Press [F/t] to adjust the intensity.
•  You can also drag the slider or touch +/- to adjust the intensity.
Auto : 0
Press [o] to save your settings.
Adjusting the flash intensity may not be effective if:
the subject is too close to the camera
you set a high ISO sensitivity
the exposure value is too big or too small
In some shooting modes, you cannot use this function.