Samsung SCC-B2335 User Manual (en)

Download
English
 –
 19
ENG
How to use OSD Menu
 be 
FAST]
gth 
otion. 
et 
RM, 
ntrast 
tion.
R.
UTO 
0, 
/120) 
r, 
ect.
es 
ast 
LC 
mode. When it gets brighter back, the mode will 
switch to the fi xed high speed electronic shutter 
mode.
However, the auto high speed shutter operates 
properly only in a camera featuring a DC or VIDEO 
lens.
In external high speed electronic shutter (EXT) 
mode, you can select one of 8 modes from OFF 
through 1/100(PAL:1/120) to 1/10K for the high 
speed electronic shutter. It works as the high 
speed electronic shutter. You can select an 
option using SHUTTER(S0), SHUTTER(S1) and 
SHUTTER(S2) on the rear.
Connect each of the terminals to GND.
See the below table for the operation.
SHUTTER(S0) SHUTTER(S1) SHUTTER(S2)
OFF
(NTSC: 1/60, 
PAL:1/50)
OFF
OFF
OFF
1/100
(PAL:1/120)
ON
OFF
OFF
1/250
OFF
ON
OFF
1/500
ON
ON
OFF
1/1000
OFF
OFF
ON
1/2000
ON
OFF
ON
1/4000
OFF
ON
ON
1/10K
ON
ON
ON
Note : 
If IRIS mode is set to ELC, the SHUTTER menu will be 
deactivated as you adjust the brightness using the 
electronic shutter.
If the SENS-UP function is set to AUTO, only items of 
OFF and AUTO are available in the SHUTTER menu.
If the SENS-UP mode is set to FIX, the SHUTTER menu 
will be deactivated.
If the FLICKERLESS function is set to ON, the SHUTTER menu 
will be deactivated.
SENS-UP  
[OFF, AUTO X2, AUTO X4, AUTO X6, AUTO 
X8, AUTO X12, AUTO X16, AUTO X24, AUTO 
X32, AUTO X48, AUTO X64, AUTO X96, AUTO 
X128, AUTO X256, AUTO X512, FIX X2, FIX 
X4, FIX X6, FIX X8, FIX X12, FIX X16, FIX X24, 
FIX X32, FIX X48, FIX X64, FIX X96, FIX X128, 
FIX X256, FIX X512]
Automatically detects the ambient level of 
darkness in the dark or low contrast scene to 
extend the accumulated time, keeping the image 
bright and sharp; It can be also used as FIX 
mode.
Note : 
If the SHUTTER option is set to fi xed electronic shutter or 
EXT mode, the SENS-UP menu will be deactivated.
If FLICKERLESS is set to ON, the FIX mode of the SENS-
UP menu will be disabled.
If the IRIS menu is set to ELC, the electronic shutter will 
control the brightness so the SENS-UP function can not 
be set to FIX mode, but to OFF or AUTO mode.
If the SHUTTER menu is set to AUTO, the SENS-UP 
menu can be set to either OFF or AUTO mode.
If the BACKLIGHT function is set to WDR, the SENS-UP menu 
can not be set to FIX.
FLICKERLESS [OFF, 
ON]
If set to ON, the shutter speed will be fi xed to 
1/100(PAL:1/120) second. This will prevent possible screen 
distortion due to a mismatch between the vertical sync 
frequency and the blinking frequency of the lighting.
Note : 
If the IRIS function is set to ELC, the Flickerless menu will 
be deactivated. If the SHUTTER menu is set to AUTO, FIX 
or EXT mode, the Flickerless menu will be deactivated.
If the SENS-UP function is set to FIX mode, the Flickerless 
menu will be deactivated.
If AGC is set to FIX mode, the FLICKERLESS function will 
be disabled.