Samsung SCC-B2335 User Manual (en)

Download
English
 –
 23
ENG
How to use OSD Menu
GC 
d.
the 
INTELLIGENCE
eINTELLIGENCEf
MOTION OFF
ADVANCED OFF
MASK AREA 
1  2 3 4
DISPLAY ON
SENSITIVITY [4]
RESOLUTION [5]
ALARM OUT 
 
You can set the motion detection and tracking in the 
INTELLIGENCE menu.
MOTION 
[OFF,TRACKING,DETECTION]
TRACKING
Detects and tracks a moving object.
DETECTION
Detects a moving object.
Note : 
If it is set to DETECTION, you can not set such functions as 
FIXED/MOVED and FENCE in the ADVANCED menu.
ADVANCED 
[OFF, FIXED/MOVED, FENCE]
Detects a motion of an object and displays an 
image of any moving object before tracking the 
moving route.
FENCE
This is to detect if a moving object passes 
through the specifi ed LINE or AREA.
In a condition where a moving object is detected 
in an analysis of the previous and current frames 
whose movement overlaps a certain area, the 
system displays “PASS” if the object’s center line 
passes through the line while it displays “ENTER” 
or “EXIT” if the center point passes through the 
area.
‹FENCE‹
LINE OFF
AREA OFF
                    
You can set the position and detection direction of the 
LINE, and the size and position of the AREA.
- How to set the line
‹LINE‹
PIXEL LEVEL 
[4]
<POINT>
DIRECTION 
§¨
                     
①  If you press the SETUP switch with the LINE 
option set to ON, you can specify the position 
and detection direction of the line.
②  If you change the PIXEL LEVEL for setting 
the position, specify the pixel that moves by a 
single pressure of the 
cdef
 switch.
③  In <POINT>, you can specify the fi rst position of 
the line by pressing the SETUP switch once, and 
the second position by pressing the switch again.
Use the 
cdef
 switch to specify the 
position.
Set each position of the two points and press the 
SETUP switch to complete the positioning.
④  If you change the DIRECTION, you can specify 
the detection direction. The detection direction 
based on the defi ned two points will be 
displayed on the screen.