Samsung SCC-B2335 User Manual (en)

Download
26 – DIGITAL COLOR CAMERA
How to use OSD Menu
OTHER SET
eOTHER SETf
EXTERNAL TRG 
OFF
FACTORY DEFAULTS 
OSD COLOR 
BW
 
EXTERNAL TRG
Set the EXTERNAL TRG menu to ON and press 
the SETUP switch to display the appropriate 
screen.
‹EXTERNAL TRG‹
STILL TIME 
OFF
DELAY TIME 
FIX
 
 
    
You can set the STILL TIME to 0~4 seconds.
If DELAY TIME is set to FIX, the DELAY TIME will 
be set in sync with the STILL TIME; if set to USER, 
the DELAY TIME will be set to your setting.
Note : 
If VPS is set to OFF, the EXTERNAL TRG menu will be 
deactivated.
FACTORY DEFAULTS
All the settings will be restored to the factory 
default.
However, the settings of PROTOCOL, BAUD 
RATE, ADDRESS and LANGUAGE will not be 
restored to the default.
OSD COLOR   
[BW, R/G/B]
You can set the OSD(On-screen Display) color to 
COLOR or B/W.
COMMUNICATION
eCOMMUNICATIONf
RS-485 
 PROTOCOL 
SAMSUNG
 BAUD RATE 
9600
 ADDRESS 
0
 
 
The COMMUNICATION menu is used to confi gure 
the settings regarding RS-485 communications.
Use the rear panel of the camera to connect to 
RS-485.
            [Camera I/O Connector]
Use the 
cdef
 switch to specify the protocol, 
baud rate and address (0~255) for communications.
PROTOCOL  
Select a communication protocol.
BAUD RATE   
Select a baud rate.
Note : 
The baud rate differs, depending on the specifi ed 
protocol.
ADDRESS  
[0~255]
You must specify a unique address for each 
camera in the same RS-485 network.
To control a specifi c camera, you must match the 
address of the camera with that of the DVR or the 
controller.
SYS
You 
proto
versi
LAN
The c
Selec