Canon VB-H41 User Manual (en)

Download
71
S
et
ting P
age
5
Certificates
(1) [Create Self-Signed Certificate] 
After entering each of the following settings, click 
[Exec] to create a self-signed certificate. Follow the 
instructions in the message and reboot. The certificate 
created will take effect after rebooting. 
Note
Creating a certificate takes time, so it is recommended that you 
stop video transmission and upload processes.
(2) [Certificate Status] 
If no certificate is installed, [Not Installed] will appear. 
If a certificate is installed, [Installed] will appear. 
(3) [Country (C)] 
Enter the country code. 
(4) [State/Province (ST)], [Locality (L)], [Organization (O)], 
[Organizational Unit (OU)], [Common Name (CN)] 
Enter state/province name, locality, organization 
name, organizational unit and common name in ASCII 
characters (spaces or printable characters). Enter a 
FQDN format host name, etc. to set the common 
name (required). 
(5) [Validity Period Start Date], [Validity Period End Date] 
Set the validity period of the certificate to be created in 
the range of 2001/01/01 to 2031/12/31 (required when 
creating a self-signed certificate). 
Certificate Management
(1) [Generate Certificate Signing Request] 
Click [Exec] to create server private key and a self-
certification authority private key to generate a 
certificate signing request. Once processed, the 
certificate signing request will appear in a separate 
window. 
Note
Generating a certificate signing request takes time, so it is 
recommended that you stop video transmission and upload 
processes.
(2) [Display Certificate Signing Request Details] 
Click [Exec] to view the details of the certificate 
signing request. 
(3) [Install Server Certificate] 
Perform this operation to install a server certificate. 
Click [Browse] to select the certificate file for 
installation, then click [Exec]. The certificate installed 
will take effect after rebooting. 
(4) [Install Intermediate Certificate] 
Perform this operation to install an intermediate 
certificate. Select the certificate file to be installed 
using the [Browse] button and click [Exec]. The 
installed certificate will take effect after rebooting. 
Note
To install an intermediate certificate and a primary intermediate 
certificate, use a text editor or similar software to place them in 
the same file and install them as an intermediate certificate.
(5) [Delete Certificate] 
Click [Exec] to delete the certificate. However, if SSL 
communications are enabled, the certificate cannot 
be deleted. Set [SSL Communications] to [Disable] 
before deleting a certificate. The deletion will take 
effect after rebooting. 
(6) [Display Server Certificate Details] 
Click [Exec] to view the details of the certificate. 
(7) [Self CA Certificate] 
Used for the purpose of testing SSL communications, 
but otherwise not normally used. 
[SSL/TLS] Setting HTTP Communication Encryption
The following can be set here. 
• Certificates
Create an SSL/TLS certificate. 
• Certificate Management
Manage the SSL/TLS certificate. 
• Encrypted Communications
Set the encrypted communication.
Important
With regard to security, it is recommended that you use a self-
signed certificate where complete security does not need to be 
ensured through operation tests, etc. For system operation, 
acquire and install a certificate issued by a CA.