Panasonic BLVT164P User Manual (en)

Download
IMPORTANT
When entering the host name for “SMTP server address” or “POP server address”, it is necessary to
configure the DNS settings on the [Network] tab of the “Network” page. (
[Authentication]
Type
Select the authentication method to send E-mails from the following.
None: It is not necessary to clear any authentication to send E-mails.
POP before SMTP: It is necessary to first clear the POP server authentication to use the SMTP server
to send E-mails.
SMTP: It is necessary to clear the SMTP server authentication to send E-mails.
Default: None
Note
When you don’t know the authentication method to send E-mails, refer to the network administrator.
User name
Enter the user name to access the server.
Available number of characters: 0 - 32 characters
Unavailable characters: " & : ; \
Password
Enter the password to access the server.
Available number of characters: 0 - 32 characters
Unavailable characters: " &
[Sender’s E-mail address]
Enter the E-mail address of a sender.
The entered E-mail address will be displayed in the “From” (sender) line of the sent E-mails.
Available number of characters: 3 - 128 characters
Available characters: Alphanumeric characters, the at sign (@), the period (.), the underscore (_), and
the hyphen (-).
14.2  Configure the settings relating to the FTP server
[FTP]
Click the [FTP] tab on the “Server” page. (
The settings relating to the FTP server used to transmit the alarm images can be configured on this page.
100
Operating Instructions
14 Configure the settings of the servers [Server]