Panasonic BL-VP100 User Manual (en)

Download
9.2  Configure the settings relating to JPEG images
[JPEG/H.264]
Click the [JPEG/H.264] tab on the “Image/Audio” page. (
JPEG
Configure the settings such as “Refresh interval (JPEG)*”, “Image capture size” and “Image quality” on this
section. Refer to page 49 for further information about the settings relating to H.264 images.
"Live" page (Initial display)
Configure the settings relating to the JPEG images displayed on the “Live” page.
[Refresh interval (JPEG)*]
Select an interval to refresh the displayed JPEG image from the following.
0.1fps/ 0.2fps/ 0.33fps/ 0.5fps/ 1fps/ 2fps/ 3fps/ 5fps/ 6fps*/ 10fps*/ 12fps*/ 15fps*/ 30fps*
Default: 30fps*
Note
When “H.264 transmission” is operating, the refresh interval may be longer than the set value when
any value with an asterisk (*) on the right is selected.
Depending on factors such as the network environment, the resolution, the image quality, or the number
of computers concurrently accessing the camera, the transmission interval may be longer than the set
value.
If images are not delivered in the specified transmission interval, you can make the images be delivered
closer to the specified time by lowering the resolution or image quality.
[Image capture size]
Select the image capture size to display the JPEG image on the “Live” page for the first time.
When “4:3” is selected for “Aspect ratio”
VT164W
VT164W
 
VT164
VT164
 
VP104W
VP104W
 
VP104
VP104
:
QVGA/ VGA/ 800x600
VP101
VP101
:
QVGA/ VGA
When “16:9” is selected for “Aspect ratio”
VT164W
VT164W
 
VT164
VT164
 
VP104W
VP104W
 
VP104
VP104
:
320x180/ 640x360/ 1280x720
Operating Instructions
47
9 Configure the settings relating to images and audio [Image/Audio] (BL-VT164W/BL-VT164)/ Configure the settings
relating to images [Image] (BL-VP104W/BL-VP104/BL-VP101)