Panasonic BL-VP100 User Manual (en)

Download
Audio may temporarily be interrupted and noise may be heard when multiple users are accessing the
camera concurrently. It may be possible to diminish the interruption or noise by setting a longer interval
for “Audio output interval (PC to Camera)”.
Audio may sometimes not be heard depending on the network environment.
[Audio output port (PC to Camera)]
Enter the transmission port number (the port number on the camera used to receive audio data transmitted
from the PC).
Available port number: 1024-50000 (Only even numbers are available.)
Default: 34004
Note
The transmission port number entered for “Audio output port (PC to Camera)” will be used only when
“Unicast port (MANUAL)” is selected for “Transmission type” (
When “Off” is selected for “H.264 transmission” (
®page 49) or when “Unicast port (AUTO)” or
“Multicast” is selected for “Transmission type”, it is not necessary to enter the transmission port number.
[Permission level of audio trans./recep.]
Select an access level for audio transmission/reception from the following.
1. Level 1 only/ 2. Level 2 or higher/ 3. All users
Default: 3. All users
Note
[Muting while panning/tilting]
Select “On” or “Off” to determine whether or not to mute the camera's microphone when the camera is panning
or tilting. Select “On” to mute the noise from when the camera is panning or tilting.
Default: On
Note
When this function is set to “Off”, the microphone will be active when the camera is panning or tilting,
and noise from the panning/tilting may be picked up by the microphone.
74
Operating Instructions
9 Configure the settings relating to images and audio [Image/Audio] (BL-VT164W/BL-VT164)/ Configure the settings
relating to images [Image] (BL-VP104W/BL-VP104/BL-VP101)