Canon 10D User Guide (en)

Download
81
Manually Erasing Dust (Repair Function)
You can erase dust spots in an image by selecting them one by one. 
1
In the main window, select the image you want to 
erase dust spots.
2
Select the [Tools] menu   [Start Stamp tool].
¿
The copy stamp window appears.
3
When the image has redrawn itself, double-click the 
point from where dust is to be erased.
¿
The display changes to 100% view.
O
The display position can be changed by dragging.
4
Click the button that matches the dust spots to be 
erased.
O
If the dust spot is dark in color, click the [
] button, and if 
the dust spot is light in color, click the [
] button.
O
When you move the cursor over the image, the dust erasure 
range appears as [ ].
Double-
click
O
Click several times when dust spots are not erased completely
Where unwanted dust spots are not erased even after performing 
step 5 once, they may be erased completely when you click several 
times.
O
Mainly spots of dust can be erased with the repair function
Spots of dust can be erased with the repair function. You may be 
unable to erase lines of dust. In this case, use the copy stamp 
function 
.
5
Place the dust spot to be erased within the [ ] and 
click.
¿
The dust spot within the [ ] is erased.
O
Click on another part of the image to continue to erase dust spots 
in the image.
O
To erase dust in another part of the image, either right-click with 
the mouse, or click the button clicked in step 4 again to cancel dust 
erasure processing and perform the operation again from step 3.
O
When the dust spot cannot be erased, [
] is displayed.
6
Click the [OK] button to return to the main window.
¿
The [
] mark 
 is displayed on an image from which dust 
spots have been erased.
Additional information
Click