Netopia 3346N-ENT User Guide (en)

Download
5-22  Firmware User Guide
The Communications window appears.
5.
In the Communications window, select Dial-Up Networking and click the OK button.
This returns you to the Windows Setup screen. Click the OK button.
6.
Respond to the prompts to install Dial-Up Networking from the system disks or CDROM.
7.
When prompted, reboot your PC.
Creating a new Dial-Up Networking profile
A Dial-Up Networking profile is like an address book entr y that contains the information and parameters you 
need for a secure private connection. You can create this profile by using either the Internet Connection Wizard 
or the Make New Connection feature of Dial-Up Networking. The following instructions tell you how to create the 
profile with the Make New Connection feature. Do the following:
1.
Double-click the My Computer (or whatever you have named it) icon on your desktop.
Open the Dial-Up Networking folder, and then double-click Make New Connection. The Make New 
Connection wizard window appears.
2.
Type a name for this connection (such as the name of your company, or the computer you are dialing into).
From the pull-down menu, select the device you intend to use for the vir tual private network connection. 
This can be any device you have installed or connected to your PC. Click the Next button. A screen appears 
with fields for you to enter telephone numbers for the computer you want to connect to.
3.
Type the director y number or the Virtual Circuit Identifier number.
This number is provided by your ISP or corporate administrator. Depending on the type of device you are 
using, the number may or may not resemble an ordinar y telephone director y number.
4.
Click the Next button.
The final window will give you a chance to accept or change the name you have entered for this profile. If 
you are satisfied with it, click the Finish button. Your profile is complete.