Netopia 3346N-ENT User Guide (en)

Security   10-45
Since the Source IP Network Address in the Router is 01100000, and the source IP address after the logical 
AND is 01100000, this rule 
 match and this packet will 
 be for warded. This rule masks off a 
Configuration Management
Netopia Firmware Version 8.6.1 offers a Configuration Management feature. Configuration Management 
provides a way to store several gateway configurations in a single device for use at different times.
You can store up to 15 configurations in the router’s memor y in addition to the currently running configuration. 
The current configuration is the one currently booted from and is updated whenever there is a change to the 
gateway (logged events, parameter changes). 
Other configurations are stored along with the current configuration. Whenever you choose, you can reboot into 
one of these configurations (the copy of which becomes the current configuration). 
You name the saved configurations, giving you a reference for identifying each one. The naming operation 
occurs when you decide to save a configuration or when downloading a configuration via TFTP.
The configurations that are saved will persist across a Factor y Default (soft or NMI). The gateway will reboot 
with a Factor y Defaulted configuration, as usual, but the saved configurations are still available for use.
You save your configurations in the Configuration Management screen in the Security menus.
Configuration Management
, and press Return. The Configuration Management screen appears.
(Logical AND result)
                                Security Options
         UPnP Enabled (on reboot):                         Yes
         Enable Telnet Console Access:                     Yes
         Enable Telnet Access to SNMP Screens:             Yes
         Console Access timeout (seconds):                 600
         Superuser Configuration...
         Advanced Security Options...
         Configuration Management...
Return/Enter accepts * Tab toggles * ESC cancels.