Netopia 3346N-ENT User Guide (en)

Download
3-4  Firmware User Guide
Stateful Inspection Options
Enable and configure stateful inspection on a WAN inter face.
When you create or modify a Connection Profile, the IP Profile Parameters screen allows you to enable Stateful 
Inspection on that profile by toggling Stateful Inspection Enabled to Yes. By default, this is turned off (No). If 
you enable Stateful Inspection, the Stateful Inspection Options field appears.
Select Stateful Inspection Options and press Return. The Stateful Inspection Parameters screen appears.
                            IP Profile Parameters
         Address Translation Enabled:       Yes
         IP Addressing...                   Numbered
         NAT Map List...                    Easy-PAT List
         NAT Server List...                 Easy-Servers
         NAT Options...
         Stateful Inspection Enabled:       No
         Local WAN IP Address:              0.0.0.0
         Local WAN IP Mask:                 0.0.0.0
         Filter Set...
         Remove Filter Set
         RIP Profile Options...
Return/Enter to select <among/between> ...
Configure IP requirements for a remote network connection here.
                            IP Profile Parameters
         Address Translation Enabled:       No
         IP Addressing...                   Numbered
         Stateful Inspection Enabled:       Yes
         Stateful Inspection Options...
         Local WAN IP Address:              0.0.0.0
         Local WAN IP Mask:                 0.0.0.0
         Filter Set...
         Remove Filter Set
         RIP Profile Options...
Configure IP requirements for a remote network connection here.