Toshiba JK-PHI Leaflet (en)

Download
7.85"
11.42"
8.8"
8.8"
11.42"
8.8"
1.5"
Toshiba America Information Systems, Inc. Imaging Systems Division, Security Products Group
9740 Irvine Boulevard, Irvine, California 92618 • 1-800-550-8674 • www.cctv.toshiba.com
©2002 Toshiba America Information Systems, Inc. 
All specifi cations are subject to change.
Indoor / Outdoor Dome 
JK-PHI / JK-PHO
DESCRIPTION
The JK-PHI (indoor) and JK-PHO (outdoor) are dome housings for Toshiba’s 
Surveillix Dome™ camera. These products offer versatility and outstanding 
camera protection in a compact size. 
FEATURES
•  Durable engineered plastic top, 94V0. The JK-PHO is also UV protected
•  Quick connect pendant mount assembly
•   Accepts single fi xed camera
•  The JK-PHO is designed to meet NEMA 4X for water ingress and IP66, 
with a temperature rating of -20˚ to +120˚
ARCHITECTURAL/ENGINEERING SPECIFICATIONS
 
The JK-PHI indoor housing and JK-PHO outdoor housing shall be a 
pendant mount dome housing for Toshiba’s Surveillix Dome™ camera 
system. The units shall be designed to accommodate Toshiba’s Surveillix 
Dome™ camera system. The JK-PHO enclosure shall also be equipped 
with blowers and thermostatically controlled heaters. The input power for 
the heater and blower will be 27 watts at 24 VAC. The housings shall be 
manufactured from a high-impact engineered plastic, with a UL fl ame 
rating of 94V0, and the JK-PHO versioin is also UV protected. The dome 
shall be made of a thermoformed, optically clear, cell-cast acrylic mterial. 
The dome shall be held in place with a minimum of 3 fasteners, and a 
safety cable shall be provided to hold the dome while servicing. Access to 
the enclosure shall be from below with 3 captive fasteners, used to press 
the dome against a sealing O-ring. A twist-off feature shall allow for the 
fi nal removal of the dome. A quick-release bracket at the top of the unit 
shall be provided for ease of installation and quick removal of the unit.
ELECTRICAL SPECIFICATIONS
Standard      24 VAC    27 watts (excluding camera)
MECHANICAL SPECIFICATIONS
Size (hxwxd):       
12.8” x 11.4” x 16.1”
Weight: 
     10 
lbs. 
Construction:  
  Top: 
      
.125” 
engineered 
plastic
  Dome: 
     
Cell-cast 
acrylic
  Pendant Mount Bracket: 
Cast and machined aluminum  
Components:
  Seals: 
     
.136” 
10.25” 
O-ring
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature: 
  JK-PHO         
-20˚ F to +120˚ F
Heater activates at +40˚ F (+/-8˚), deactivates at +60˚ F (+/-8˚)
Effective Projected Area (EPA): Approx. 180 square inches
Operating Humidity: Up to 100%
MODELS
Outdoor Dome Housing
JK-PHO
  - Pendant mount unit with clear lower dome, 24 VAC input for 
heater/blower/camera
Indoor Dome Housing
JK-PHI
 - Pendant mount unit with clear lower dome, 24 VAC input camera
OPTIONS/ACCESSORIES
JK-WM
 - Gooseneck wall mount
JK-CMA
 - Aluminum corner mount adapter
JK-PMA
 - Aluminum pole mount adapter
JK-PM
 - Aluminum parapet mount
Model Unit 
 
Shipping Shipping 
 
 
Weight Weight Box 
Dim.
JK-PHO 
10 lbs 
11 lbs 
17 x 14 x 17
JK-PHI 
10 lbs 
11 lbs 
17 x 14 x 17
* Shipping weights depend on box dimensions.
JK-PHI Indoor Housing
JK-PHO Outdoor Housing
JK-PHO Outdoor Housing
JK-PHI Indoor Housing