Canon PowerShot A580 2463B020 User Guide (en)

Download
147
T
rou
bl
es
h
oo
ting
AF-assist Beam is set to 
[Off].
z
In dark places where it is difficult for 
the camera to focus, the AF-assist 
Beam will emit to assist focusing. As 
the AF-assist Beam will not function 
when turned off, set it [On] to activate 
it (p. 49). Take care not to obstruct the 
AF-assist Beam with your hand when 
used.
Subject is out of focal 
range.
z
Shoot with the subject at the correct 
focusing distance (p. 176).
z
The camera may be set to an 
unintended function (such as macro). 
Cancel the setting.
The subject is hard to 
focus on.
z
Use the focus lock or AF lock to shoot 
(p. 86).
Subject in recorded image is too dark.
Insufficient light for 
shooting.
z
Set the built-in flash to 
 (Flash on) 
(p. 59).
The subject is 
underexposed because 
the surroundings are too 
bright.
z
Set the exposure compensation to a 
positive (+) setting (p. 90).
z
Use the AE lock or spot metering 
function (p. 91).
Subject is too far away for 
flash to reach.
z
Shoot within correct flash range of the 
subject when using the built-in flash 
(p. 177).
z
Raise the ISO speed and then shoot 
(p. 65).
Subject in recorded image is too bright, or image 
flashes white.
Subject is too close, 
making the flash too 
strong.
z
Shoot within correct flash range of the 
subject when using the built-in flash 
(p. 177).
The subject is 
overexposed because the 
surroundings are too dark.
z
Set the exposure compensation to a 
negative (–) setting (p. 90).
z
Use the AE lock or spot metering 
function (p. 91).