Canon EOS 1DS MARK II 9443A009 Instruction Manual (en)

Print the image.
Select [Print].
The printing will start.
When the printing ends, the screen 
will return to step 1.
To cancel the printing, press the 
> button while [Stop] is 
displayed, then select [OK]. 
The date may look light if it is imprinted on a bright background or border.
If [Multiple] is selected, [Borders] and [Date] cannot be selected. 
[Borderless] will be set and [Date] will be set to [Off]. The image will also 
be cut off along all four edges.
If [Date] is set to [On], the recorded date will be imprinted on the lower 
right of the print.
If you select [Stop] while printing only one picture, the printing will not 
stop until it finishes printing the picture. If you are printing multiple 
pictures, the printing will stop after the current picture is finished printing.
If a problem occurs during printing, an error message will appear on the 
camera's LCD monitor. Select [Stop] or [Resume] (after resolving the 
problem). If [Resume] is not displayed, select [Stop].