Canon EOS 1DS MARK II 9443A009 Instruction Manual (en)

Download
22
With DC Coupler Kit DCK-E1, you can connect the camera to a 
household power outlet and not worry about the battery level. 
1
Insert the DC Coupler. 
¡
Insert the coupler and while pushing it 
in, turn the release handle as shown 
by the arrow. 
2
Connect the DC plug. 
3
Connect the power cord. 
¡
After you finish using the camera, set 
the <
4
> switch to <
2
> and 
disconnect the plug from the power 
outlet. 
Using a Household Power Outlet
¡
The DC Coupler is not water-resistant, so do not get it wet when using it 
outdoors. 
¡
When the <
4
> switch is set to <
1
>, do not disconnect the DC plug or 
AC adapter’s power cord from the power outlet. Otherwise, the camera 
may stop operating. If the camera stops operating, remove the DC 
Coupler from the camera and reinstall it.