GE Ca-Zoom PTZ 70 Operating Guide (en)

Download
Everest Ca-Zoom
®
 
6.2
15   Troubleshooting
83
Problem
Cause
Remedy
System will not turn on
• 
 Not plugged in
•  
Check power cord for
   proper connection to 
   properly grounded 110/240
   VAC 50/60 Hz outlet
No power to camera head
 CCU may have been turned
   on with no cable attached.  
• 
Cable may have been 
  disconnected with power on.
• 
Turn system power off for
  2 minutes to allow circuit
  to reset.
Power is on but picture is 
snowy or colored
•  
Camera is not connected
•  
Cable not seated properly at
   Pan & Tilt
•  
Turn system power off and
   connect camera
•  
Reconnect Cable
No picture on external video 
monitor
•  
Video output cable is not
  connected properly
•  
Connect proper video cable 
   to Video In of monitor
For any software problems, turn system power off for 10-15 seconds.  Turn on to reboot the 
system.  If software problems still exist, contact factory for assistance.