Fujifilm FinePix A400 User Manual (en)

Download
113
Troubleshooting
Others
Connecting to PC
PC does not 
recognize the 
camera.
The USB cable (mini-B) is not correctly 
connected to the PC or camera.
Set up the camera, and connect the USB 
cable (mini-B) correctly.
90
< PICTBRIDGE is selected in 
L USB MODE in the SET-UP menu.
Perform the below steps to cancel the 
setting before selecting @ DSC.
• Windows
A The “New Hardware Found” wizard or 
“Scanner and Camera” wizard appears.
If the wizard does not appear, proceed 
to step C.
B Click the [Cancel] button.
C Disconnect the camera from the PC.
• Macintosh
A The window for locating the driver appears.
If the window does not appear, proceed 
to step C.
B Click the [Cancel] button.
C Disconnect the camera from the Macintosh.
90
Connecting to 
printer
Cannot print with 
PictBridge.
@ DSC is selected in L USB MODE 
in the SET-UP menu.
Select < PICTBRIDGE.
79
Matters
Problems
Possible causes
Solutions
Page
Camera operation 
etc.
Nothing happens 
when pressing the 
buttons on the 
camera.
Camera malfunction may be caused 
temporarily.
Briefly remove the batteries or disconnect 
the AC power adapter. Then reload the 
batteries or reconnect the AC power 
adapter and try again.
15, 
16, 
78, 
101
The batteries have run out.
Load new or fully charged batteries.
15, 
17, 99 
The camera no 
longer works 
correctly.
Camera malfunction may be caused 
temporarily.
Briefly remove the batteries or disconnect 
the AC power adapter. Then reload the 
batteries or reconnect the AC power adapter 
and try again. If you think the camera is 
faulty, contact your FUJIFILM dealer.
15, 
16, 
78, 
101
Matters
Problems
Possible causes
Solutions
Page