Canon Speedlite 600 EX-RT User Manual (en, zh)

Download
23
You can take three shots while automatically changing the flash output. 
This is called FEB (Flash Exposure Bracketing). The settable range is 
up to ±3 stops in 1/3-stop increments.
1
Press the <E> button.
 
Press function button 3 <E>.
X
<g> is displayed and the FEB level 
display is highlighted.
2
Set the FEB level.
 
Turn <9> to set the FEB level, and 
press <8>.
X
The FEB level is set.
 
“0.3” indicates 1/3 stops and “0.7” 
indicates 2/3 stops.
 
When used together with flash 
exposure compensation, FEB 
shooting is performed based on the 
flash exposure compensation 
amount. When the FEB range 
exceeds ±3 stops, the end of the flash 
exposure level shows <I> or <J>.
g FEB
 
After the three shots are taken, FEB is canceled automatically.
 
Before shooting with FEB, it is recommended to set the camera’s drive 
mode to single shooting and check that the flash is recycled.
 
You can use FEB together with flash exposure compensation or FE lock.
 
If the camera’s exposure compensation is set to 1/2-stop increments, flash 
exposure compensation will be up to ±3 stops in 1/2-stop increments.
 
You can set FEB to remain enabled after shooting the three shots (C.Fn-
03/p.96).
 
You can change the FEB shooting sequence (C.Fn-04/p.96).
COP
Y