Canon Speedlite 600 EX-RT User Manual (en, zh)

Download
58
a: Fully Automatic Wireless Flash Shooting
5
Set the flash mode to <a>.
 
Press the <E> button on the 
master unit and set the flash mode to 
<a>.
 
The slave unit is set automatically to 
<a> during shooting via the 
control from the master unit.
 
To also fire the master unit, set the 
master flash firing to ON (p.55).
6
Check the transmission status 
and that the flash is ready.
 
Check that the <D> lamp is lit in 
green.
 
When the slave flash is ready, the 
AF-assist beam emitter blinks at 
1-second intervals.
 
Check that the <Q> slave flash-ready 
icon is lit on the master unit’s LCD 
panel.
 
When the recycling of all the flash 
units is completed, the master unit’s 
flash-ready lamp lights.
7
Check the operation.
 
Press the master unit’s test flash 
button.
X
The slave unit flashes. If the slave 
unit does not fire, check that it is 
placed within the operation range.
8
Take the picture.
 
Set the camera and take the picture, 
in the same way as with normal flash 
shooting.
X
If a standard flash exposure was 
obtained, the flash exposure 
confirmation lamp lights for 3 sec.
COP
Y