Sanyo VPC-CA102 User Manual (en)
English
26
SE
T
T
U
P
4
Use the dedicated USB interface cable (supplied) to connect the
camera and the AC adaptor, and then connect the AC adaptor to a
power outlet.
h Recharging takes place only when the camera is turned off, or when
camera and the AC adaptor, and then connect the AC adaptor to a
power outlet.
h Recharging takes place only when the camera is turned off, or when
the power save function or the sleep function has been activated.
Recharging does not take place when the camera is in the recording
mode or playback mode.
Recharging does not take place when the camera is in the recording
mode or playback mode.
<During charging...>
h During charging, the multi-
h During charging, the multi-
indicator is lit red. When charging
is completed, the indicator turns
off.
is completed, the indicator turns
off.
h The multi-indicator flashes red if
the battery pack is defective or is
not installed correctly. Make sure
that the battery pack is correctly
installed.
not installed correctly. Make sure
that the battery pack is correctly
installed.
h The charging time is approx.
120 minutes.
to AC
Multi-indicator