Epson R280 Brochura (en)

Baixar
Epson Stylus Photo R280
12 
7/07
4. Hold down the 
paper button, then press the 
power 
button. Hold down both buttons until the 
power light 
begins to flash, then release the 
power button. 
5. When the nozzle check starts to print, release the 
paper 
button. Check the printed nozzle check pattern to see if 
there are gaps in the lines.
6. If there are no gaps or lines, the print head does not need to 
be cleaned.
If there are gaps or lines, or the test patterns are faint, follow 
the instructions in the next section to clean the nozzles.
Running the Head Cleaning Utility
Using Your Computer
1. Make sure the printer is turned on but not printing, that the 
CD/DVD tray is not inserted in the printer, and the red 
ink light is off. (If the red 
ink light is flashing or on, 
you need to replace a cartridge.)
2. Windows: Right-click the 
 printer icon on your taskbar 
and select 
Head Cleaning
.
Macintosh OS X: Open the 
Applications
 folder and select 
EPSON Printer Utility2
. Select 
SP R280 Series
 
in the 
printer list, click 
OK
, and select 
Head Cleaning
.
You see a screen like the following: 
3. Click 
Start
 or 
Next
.
Cleaning takes several seconds. The printer runs a head 
cleaning cycle and the green 
power light flashes.
Caution: 
Never turn off the printer while head cleaning is in progress. You 
may damage it.
Do not insert the CD/DVD tray until cleaning has finished.
4. When the green 
power light stops flashing, make sure 
paper is loaded in the printer, then do the following:
❏ Windows: Click 
Print Nozzle Check Pattern
, then 
click 
Print
❏ Macintosh OS X: Click 
Confirmation
, then click 
Next
.
5. If there are no gaps or lines, click 
Finish
.
If there are still gaps or lines, or the test patterns are faint, 
click 
Clean
 to clean the print head again. 
If you don’t see any improvement after cleaning three times, 
turn the printer off and wait overnight. This allows any 
dried ink to soften. Then, try cleaning the print head again.
Print head 
needs to be 
cleaned:
Print head does 
not need to be 
cleaned: