Canon rebel t3 说明手册 (en)

下载
26
1
Remove the protective cover.
 
Detach the protective cover provided 
with the battery.
2
Attach the battery.
 
As shown in the illustration, attach the 
battery securely to the charger.
 
To detach the battery, follow the 
above procedure in reverse.
3
Recharge the battery.
For LC-E10
 
As shown by the arrow, flip out the 
battery charger’s prongs and insert 
the prongs into a power outlet.
For LC-E10E
 
Connect the power cord to the 
charger and insert the plug into the 
power outlet. 
X
Recharging starts automatically and 
the charge lamp turns orange.
X
When the battery is fully recharged, 
the full-charge lamp will turn green.
 
It takes approx. 2 hours to fully recharge a completely exhausted 
battery at 23
°C / 73°F. The time required to recharge the battery 
depends on the ambient temperature and the battery’s charge 
level.
 
For safety reasons, recharging in low temperatures (6°C - 10°C / 
43°F - 50°F) will take a longer time (up to 4 hours).
Charging the Battery
LC-E10
LC-E10E
COP
Y