Nikon WT-6 网络指南 (en)

下载
 Method 1: Image Transfer Mode
Use image transfer mode to upload to a computer 
photographs and movies stored on the camera memory 
cards or to save photos to a computer as they are taken. 
This guide describes how to connect to a network in 
infrastructure mode and upload pictures.
 Method 2: HTTP Server Mode (See Reverse)
In HTTP server mode, you can use a web browser to 
access the camera from a computer or iPhone and 
remotely view or take pictures or edit image comments 
or copyright or IPTC information stored on the camera. 
This guide describes how to use an iPhone to log in to the 
camera in access point mode.
Lack of space prevents a complete description of network 
settings and options.  For more information on these 
topics and on system requirements, see the WT-6 manual 
or the Network Guide.
 Infrastructure and 
Access Point Modes
When used with the D5, the WT-6 can connect in infrastructure 
and access point modes.
Infrastructure mode: Connection via a wireless LAN access point.
Access point mode: Connect to a computer or smartphone using the 
camera as a wireless access point.
En
Printed in Singapore
SB5L01(11)
6MWA5411-01
Going Wireless
with a D5 Digital SLR Camera and 
WT-6 Wireless Transmitter
This guide outlines two of the many ways you can use 
the WT-6 wireless transmitter to connect your D5 digital 
camera to a network.
Uploading Pictures in Image Transfer Mode
Wireless LAN 
access point
What You’ll Need
 A D5
 The WT-6
 USB cable (Supplied with 
the D5)
 A wireless LAN confi gured 
to supply IP addresses 
automatically
 2
 A computer
 1
  1 Before proceeding, confi rm that the computer is connected to 
a wireless network and that the Wireless Transmitter Utility is 
installed. If you are using a fi rewall, you will also need to add 
a port exception to the fi rewall exceptions list. The Wireless 
Transmitter Utility can be downloaded from the following 
website; be sure to check the system requirements prior to 
installation.
http://downloadcenter.nikonimglib.com/
  2 For information on setting up a wireless LAN, see the 
documentation provided with the wireless LAN adapter.
Connecting to an Existing Network
This section describes how to create a network profi le and 
connect to an existing network.
q
 Connect the WT-6 to the camera.
Turn the camera off , connect the WT-6, and then turn the 
camera on.
w
 Select Wireless LAN.
In the camera setup menu, select Network > Choose 
hardware
 and highlight Wireless LAN.
Press 
J to select the highlighted option and return to 
the network menu.
e
 Start the connection wizard.
Select Network settings > Create profi le > Connection 
wizard
.
r
 Select Image transfer mode.
Select Image transfer.
t
 Enter a profi le name.
A default profi le name will be 
displayed; to change the name as 
described in the WT-6 manual, press 
the center of the multi selector. Press 
J to proceed to the next step when 
entry is complete.
y
 Select Search for wireless network.
The WT-6 will search for wireless 
networks.
u
 Choose a network.
A list of network SSIDs will be 
displayed.  Select the SSID used by 
your network.
 Hidden SSIDs
Hidden SSIDs do not appear in the list of available networks.  To 
connect to a network with a hidden SSID, select a blank SSID. 
When prompted, press the center of the multi selector, enter 
the SSID, and press 
J to complete entry, then press J again to 
proceed to the next step.
i
 Enter the encryption key.
Enter an encryption key if 
prompted (if the network uses open 
authentication, this dialog will not be 
displayed; proceed to Step 
o
).
When a connection is established, the 
message at right will be displayed, 
followed by the dialog shown in 
Step 
o
.
o
 Select Obtain automatically.
Press 
J when the 
camera IP address 
is displayed.
!0
 Connect the camera to the computer.
When prompted, connect the camera 
to the computer via USB.
!1
 Start the Wireless Transmitter Utility.
Pairing starts automatically.
!2
 Disconnect the camera.
Disconnect the camera from the 
computer when prompted.
!3
 Select Connect and exit wizard.
The wizard will end and network 
status will be displayed.
Uploading Pictures
After connecting to the network, follow the steps below to 
upload pictures from the camera memory cards.
z
 Display pictures.
Press the camera 
K button.
x
 Choose a picture.
Display a picture full frame or 
highlight it in thumbnail playback.
c
 Upload the picture.
Press 
J and the center of the multi 
selector.  A white transfer icon will 
appear on the picture and upload will 
begin immediately.  The transfer icon 
turns green during upload, and turns 
blue when upload is complete.
To upload a picture that has already been uploaded once, 
press 
J and the center of the multi selector once to 
remove the blue transfer icon, and then press 
J and the 
center of the multi selector again to mark it with a white 
transfer icon.
 During Upload
Do not remove the memory card during upload.
 Auto Upload
To upload photographs as they are taken, select On for Network > 
Options > Auto send in the camera setup menu.
 Destination Folders
By default, images are uploaded to the following folders:
•  Windows: \Users\(user name)\Pictures\Wireless Transmitter 
Utility
•  Mac: /Users/(user name)/Pictures/Wireless Transmitter Utility
The destination folder can be selected using the Wireless 
Transmitter Utility.